Solar Water Heater
Solar Collector
Solar Accessory
Water Heater Machinery
Flip Flap Solar Toys
Home Product Catalog Light & Lighting Solar Product PVC Indoor Material Wire&Cable Custom Page Contact Us
Solar Accessory 
SP116-Solar Working Station-Single Loop  
SP118-Solar Working Station-Single Loop  
SP226-Solar Working Station-Double Loop  
SP228-Solar Working Station-Double Loop  
SP116 Type-Pipeline Components Introduction: (Double Loop)
1.Safty Valve
Assure the whole system work saftly.
2. Check Valve
Brass material
3.Wilo Pump
the pump is a standard configuration of this system
4. Pressure Meter
hydraulic pressure and aseismatic gauge can display the system pressure in the range of 0 to 10 Pa
5. Expension Tank Connector
Expension tank can avoid the system work under negative pressure
6.Water Flower Sensor
Check the medium flow in time.
7.Releaser
Use painted steel tube, can release the air come out from medium flo.On the basis of quantity and frequency of air come out from the system,can check the system leak or not.
8. Pipe Temperature Display
When the medium flow in the system, can temperature and show in the first time. The temperature probe is put into a protection tube,can change easily,no need to coloseany other parts.
9. Medium Filler
Turn the handle to 90 degree, can add the medium.
10. Insulation Material
EPSEPS
11. Screw
1/2 inch
12. Max. Work Temperature
Forward Flow End (with check vaive) :150℃
Return End(with pump): 110℃ 

Product Features:
1. Out Dimention450mm*310mm*150mm
2. Max. Power Consumption
≤3W
3. Temperature Accuracy
±2℃   Temperature Range0~150℃
4. Power of Circulating Pump
<600W
5. Power of electrical heater
≤3000W
6. Incoming Signal
6 pcs sensor (PT1000 use for collector, NTC19K.B=3950 use for water tank)
7. Outcoming Sigbal5 pcs electric heater, 4 circulate pump. And 1 three-way solenoid valve
8. System Pressure0.8MPA     Safty Valve Pressure0.6MPA
 
Advantages:
A
Can control the solar system separately.
BEasy to install, labor-saving, and beautiful design.
CEasy to check the water flow and see temparature display
D. Can release the redundant gas of system, easily check leak or not.
Expansion Tank 
Water Pump 
Solar Controller 
SP106 Type Solar Working Station 
Working Station is composed of imported Italy expansion tank, intelligent controlling Apparatus and imported Germany Wilo water pump.

Expansion Tank Capacity

Voltage
Water Tank Capacity
5L
220-240V
150-180L
8L
220-240V
200L-300L
12L
220-240V
300L-400L
20L
220-240V
400L-500L
5L
110-130V
150-180L
8L
110-130V
200L-300L
12L
110-130V
300L-400L
20L
110-130V
400L-500L

 

Sensor 
Electromagnetic Valve  
Display 
Solar Controller 
The Solar Controller is composed of three parts: sensor, electromagnetic valve, and meter.

Function Description:

Ø         Water-emperature display.

Ø         Water-level display.

Ø         Cock display.

Ø         Water level preset.

Ø         Water-temperature preset.

Ø         Water-full stops.

Ø         Water fill on shortage.

Ø         Manual filling water.

Ø         Timing filling.

Ø         Forced filling.

Ø         Manual heating.

Ø         Constant-temperature heating.

Ø         Power-leakage production.

Ø         Water-overflow protection.

Ø         Preseve heat in water pipes.

Ø         Booster pump in water pipes.

Ø         Prevention of empty burning.

Ø         Memories-on with power off.

Ø         Intelligent mode.

Ø         Timing mode.

Ø         Temperature-control mode.

Ø         Timing filling twice.

Ø         Timing heating twice.

Ø         Pipe-explosion protection.
Pipeline Connection Parts 
Pipeline Connection Parts 
Pipeline Connection Parts 
Pipeline Connection Parts 
Copper Electrical Heating 
Copper Electrical Heating 
Copper Electrical Heating 
Magnesium rods  
Feeder Tank 
Assistant Tank 
 
 
 
 
 
 

Home  |  Product Catalog  |  Light & Lighting  |  Solar Product  |  PVC Indoor Material  |  Wire&Cable  |  Custom Page  |  Contact Us  |  Sitemap
Powered by DIYTrade.com
HomeContact UsSitemap