CFL light & Energy Saving Lamp - Light & Lighting Product - Haining Tonghua.--Solar Water Heater, Solar Vacuum Tube, Cable & Wire, Energy Saving Lamp, LED, HID........

BizVerify

Haining Tonghua Import & Export Co., Ltd.

Verified By : Huaxia D&B

Verified Date : 2009-11-17

CFL light & Energy Saving Lamp

Lighting Terms

Term	Symbol	Unit	Description
Luminous Flux	??	Lumen (LM)	The rate of flow of light per unit of time, especially the flux of visible light expressed in Lumen.
Brightness	I	Candela (Cd)	A unit of luminous intensity per square centimeter in one direction for illuminant
Luminous Intensity	E	Lux	The International System unit of illumination, equal to one lumen per square meter.
Average Life	H	Hour	The hour numbers when 50% among a batch of bulbs damage and could not illuminate
Economic Life	H	Hour	With considering both damage of the bulb and the state of decaying for light beam export, the hour number for the out put for comprehensive light beam to one specific proportion. It is 70% that this proportion is used in the outdoor light source , while it is 80% to be used in the indoor light source such as the fluorescent lamp.
Color Temperature	K	??	The colour temperature degree shows with absolute temperature K (kevin) , heat a standard boldface (for example the iron ), at it rise temperature until one degree it begin color by the red-> the pale red-> the orange-> the white-> the blue and white-> the blue, change gradually. With this light??s change??s characteristic, when the light color for some light source is the same as a certain temperature boldface of light source, we call the definitely temperature for the boldface as the colour temperature for this light source . When the colour temperature degree is under 3000K, the light color begins to lean towards red phenomena, give peolpe a kind of warm feeling.. When the colour temperature degree exceeds 5000K, the color leans to the blue, gives people a kind of deserted feeling.
Colour Rendering	Ra	??	The show degree for the light source to show the object?? color, that is also called color lifelike degree. The high colour rending light source could show better color for the object and the the clor we see is close to natural primary color. The low colour rending light source will show worse color for the object, and the color deviation that we see is relatively great too.
Light Source Efficiency	Lm/W	??	Light source efficiency (Lm/w ) =The lumen (Lm ) / power consumption ( w)
Glare	??	??	There is object extremely high in luminance that passes the strong luminance contrast in the vision , can cause the vision not comfortable , called the glare. Glare can be devided into lose sex glare and comfortableness glare. Glare is the important factor for affecting quality.

1. CFL:–Compact Fluorescent Lamp

2. Watt:– A unit of electrical power

– Rated Watt

3. Voltage: – A measurement of the electromotive force in electrical circuit

– Rated Voltage

4. Luminance: – A measure of photometric brightness

5. Luminous Efficacy:

The light output of a light source divided by the total power input to that source

– Incandescent,5~22LPW,750~2K Hour

– Halogen,12~36LPW, 2~5K Hour

– CFL,27~80LPW, 9~10K Hour
– Metal Halide,80~115LPW, 10~20K Hour

– HPS ,90~140LPW,10~24 Hour

– Fluorescent,75~100LPW, 12~24K Hour

– Mercury50~60LPW, 12~24K Hour

6. CRI: Color Rendering Index : a lamp’s ability to render object colors.
– Incandescent CRI = 100

– Halogen CRI = 100

– CFL CRI < 83

7. Color Temperature

expressed in Kelvins (K), is one way to describe this color tone.

– 2700K~3000K warm white

– 3500K neutral white

– 4100K cool white

– 6400K daylight

8. Current crest factor (CF)

– < 1.7

9. U type

– 2U

– Triple U/3U

– Quad

– 4 U

– 5U-9U

10. Spiral

– T4 spiral (Φ12)

– T3 spiral (Φ 9) – Slim spiral

11. Candle

12. Globe

13. Bullet

14. Household -A lamp

15. PAR & R lamp

16. Frosted Lamp

17. Pilot lamp

18. Neon tubing

19. Cold cathode fluorescent lamp (CCFL)

20. Incandescent lamp

21. fluorescent lamp

22. High pressure sodium lamp

23. Metal halide

24. Spot lighting

25. Flood lighting

26. Bactericidal lamp -Ultraviolet lamp

27. Base E26, E27

28. Lamp holder

29. Plastic housing

30. Lighting source

31. Luminous flux

32. Luminous intensity

33. Spectrum

– Continuous spectrum

– Line spectrum

– Full spectrum

34. Lumens depreciation (evanescence

35. Initial lumens

36. Lamp flicker

37. Wire jumper

38. Enamel-covered wire

39. Component

40. Toroidal ring

– Toroidal base

41. Resistor

– Metal film resistor

– Carbon film resistor

42. Capacitor

– Electrolytic capacitor

– Metallized polypropylene film capacitor

– Polypropylene film capacitor

– Metallized polyester film capacitor

– Polyester film capacitor

43. Diode
– Rectifier diode

44. Transistor

45. MOS

46. IC – integrate circuit

47. Tube

– Electrode

– Cathode

– Cathode activation

– Cathode breakdown

– Cathode coating

– Cathode contamination （poisoning)

– Cathode emission

– Cathode evaporation

– Cathode glow

– Cathode potential

– Cathode region

– Cathode sputtering

– Cathode –voltage drop

– Anode

– Anode bar

– Anode current

– Anode dark space

– Anode potential

– Anode sputtering

– Anode terminal

– Distance between anode and cathode

– Filament

– Tube’s lead wire

– Filament voltage

– Phosphor

– Amalgam

– Argon

– Neon

– Exhaust tube

– Maximum overall diameter (MOD)

– Maximum overall Length （MOL）

48. Plastic housing

– Sandy finish

– Gloss finish

49. Silk screen

50. Soldering dip

– Solder temperature

51. Hot melt glue

52. Aging test